Filter
Top Products
m
1. Turn au top burners to LOW.
2. Remove allfour knobs.
3, With a smallflat blade screwdriver, turn the
valveset screws clockwiseto decrease flame
ske, counterclockwise to increase flame size.
Adjust until the flaxneis about the same height
as the top ofthe burner.
4. Replace knobs.
~. Check for flame outage by opening and
closing the oven door several times. If the flame
goes out, increase the flame size.
MADJV$TFHESURFACEBURMERPuLom
(formodels equipped with standing pilots)
1. Raisethe cooktop.
2. hcate the pilot
adjustmentscrew.It can
be accessedthrough the
w
sma~holenearth~center
ofthe manifoldpanel.
3. Toadjust,use a blade-typescrewdriverwith
a shaftdiameteroflessthan3/16”.Turn pilot
adjustmentscrewuntilpilotis 5/16”high.Do
notreduce theflme tolessthan 5/16”or pilot
outagemayoccur.Apilotflameburninghigher
tian recommendedmaygeneratesoot (carbon
black)onthe bottomofyourcooktop.
❑ CHECKQUALITYOFFmEs
Thecombustionqutity ofburnerflamesneeds
to be determinedvisually.
Ifburner flameslooklike (A),callforservice.
Normalburnerflamesshouldlooklike@)or
(C),dependingonthe typeofgasyouuse.
WithLPgas,someyellowtippingon outercones
isnormal.
(A) YeUowflmes-
Callforservice
~) YeUowtipson
outercones-
NormalforLPgas
(C) %ft blueflmes-
Normalfor natural gas
45
—