Filter
Top Products
ms~fi~i~~o~ msTRucTIo~s
(continued)
,.’
1. Removeovendoor,storagedrawerorbroiler
drawer,ovenbottomandburnerbaffle.The
lowerburner orificespudislocatedbehindthe
storagedrawer,broilerdraweror kickpanel.(On
somemodels,ametalshieldmustbe removedto
accessthe orifice.)
2. TOconvert to U
gas,
use a 1/2”wrenchtoturn
the lowerburner orifice
spudcloctilse. Tightenthe
spudonlyuntilitis snug.
Topreventdamage,do
not overtightenthe spud.
To convert b na~d gas, =
loosen the spudabout2turns.
❑ coHvEti4uRMJusTmEHTSHUT?E*(S)
ForU gas,loosenthe ~
Phillipsheadscrewand
rotatetheshuttertothe
Screw
fufl
openposition.With
AirShutter
baffleinplace,flames
shouldhaveapproximately
l-inchblueconesand
shouldnotextendbeyond
the edgesofthe burnerbtifle.Mer 30seconds
ofburneroperation,checkforflamesliftingoff
burnerports.Ifliftingis observed,gradually
reduceairshutteropeninguntilflamesare
stabilized.
For natial gas, theshutter should be open
1/2” or about 3/4 ofthe way open.
Whenallconnectionshavebeenmade,makesure
allrangecontrolsare inthe offpositionandturn
onthe maingassupplyvalve.Usea liquidleak
detectorat alljointsandconnectionstocheckfor
leaksinthe system.
I
CA~ON: DON~ USEA F- ~
CHECKFORGM ~.
Ii
When using test pressures greater than 1/2 psig
to pressure test the gas supplysystem ofthe
residence, disconnectthe range and individual
shut-offvalvefromthe gas supplypiping.When
using test pressures of 1/2 psig or less to test the
gassupplysystem,simplyisolatethe rangefrom
thegassupplysystembyclosingtheindividual
shut-offvalve.
B
B
TOconvert to U gas, use a 1/2”wrenchto
turn the upperburnerorificespudclockwise.
Tightenspudonlyuntilit is snugwiththe base.
TOpreventdamage,donot overtightenspud.
To
convertto na~d gas, loosenthe spud
about2turns.
1
44
..