GE JKP16 Oven User Manual


 
A..~r Self-Cleaning
You
may notice some white ash in the oven. Just wipe
If the oven is not clean after one clean cycle, repeat
it up with a damp cloth after the oven cools.
the cycle.
If white spots remain, remove them with
a
soap-
If the shelves become hard to slide, wipe the shelf
filled steel wool pad. Be sure
to
rinse thoroughly
supports with cooking oil.
with a vinegar and water mixture. These deposits are
NOTE: No
functions can be programmed before the
usually
a
salt residue that cannot
be
removed by the
door automatically unlocks.
clean cycle.
How to Set Delay Start of Cleaning
Quick Reminder:
1.
Press the AUTO SELF CLEAN pad.
2. Press the INCREASE or DECREASE pad
until the desired Clean Time appears.
3. Press the STOP TIME pad.
4. Press the INCREASE or DECREASE pad until
the desired Stop Time appears in the display.
Delay Start is setting the oven timer to start the clean
cygle
automatically at a later time than the present
t’
>f
day.
Nu
IE:
Before beginning, make sure the oven clock
shows the correct time of day.
1.
Follow the directions in the Before a Clean
Cycle section.
m
2.
After
t
~sing
the door, press the
AUTO SELF
CLEAN
AUTO SELF CLEAN pad.
A
3. Press the INCREASE or DECREASE
\
pad
[o
enter the Clean Time.
n
4. Press the STOP TIME pad.
STOP
“SET STOP TIME” and the earliest
‘~lME
Stop Time you can set will appear in
A
the display.
The earliest Stop Time will be the Clean Time
~elected
plus
th
e
time of day. For
examPle:
1f
the Clean Time is
3
hours and the time of day
is
6:00,
the Stop Time that appears in the display
will
be
9:00.
A
5. Press the INCREASE pad to change
the Stop Time to a later time of day if
@
desired.
For example:
If you set the
Stop Time at 11:00, the oven will start
the clean cycle at
8:00
and end at
11
:00.
The door latches automatically.
The self-clean cycle will automatically begin after
“CLEAN” is displayed and the time for the clean
cycle is set. The words “ON” and “LOCK” will
appear in the
display
when the door
automatically
locks. It will not be possible to open the oven door
until the temperature drops below the lock
temperature and the LOCK light goes off.
6.
When the LOCK light is off, open the door.
NOTE:
During a delayed self-clean operation you
can
find
out when the oven is set to turn on by pressing
and
holding the AUTO SELF CLEAN pad for 3 seconds.
A fan may automatically turn on and off to cool
internal parts. This is normal and the fan may
continue to run even
after the oven is turned off.
31