GE JKP16 Oven User Manual


 
.
.obe
The temperature probe may be cleaned with soap and
water or
a
soap-filled scouring pad. Cool the
temperature probe before cleaning. Scour stubborn
spots with a soap-filled scouring pad, rinse and dry.
Do not immerse the temperature probe in water.
Do not store the temperature probe in the oven.
Oven Light Replacement
CAUTION: Before replacing your oven light bulb,
disconnect the electrical power for your oven at
the main fuse or circuit breaker panel.
Be sure to let the light cover and bulb cool completely
before removing or replacing them. When in use, light
bulbs can become warm enough to break if touched
with a moist cloth or towel. When cleaning, avoid
touching warm lights with cleaning cloths if the light
cover is removed.
The oven light is covered with a removable glass
cover which is
held
in place with a wire. Remove the
oven door, if desired, to reach the cover easily.
remove:
iold
your hand under the cover so it doesn’t
fall
when released. With fingers of the same hand,
firmly push back the wire cover holder. Lift off the
cover.
DO NOT REMOVE ANY SCREWS.
Replace bulb with 40-watt home appliance bulb.
To replace cover:
Place it into the groove of the light receptacle. Pull
the wire forward to the center of cover until it snaps
in place. When in place, the wire holds the cover
firmly. Be certain the wire is in the depression in the
center of the cover.
Connect the electrical power to the oven.
(Cc)tftitlut,[{
fIcrl
/?ci,qe)
Wire cover holder