Filter
Top Products
FEATUWS
OF YOUR OVEN CONTROL
1.
CONV.
BAKE. Press this pad to select baking
with convection.
2. BAKE. Press this pad to select the bake function.
3.
CLEAWOFF.
Press this pad to cancel all oven
operations except clock and timer.
4. DISPLAY. Shows the oven operations you have
selected, the time of day and the cooking or
cleaning status.
5. INCREASE. Short taps to this pad increase the
time or temperature by small amounts. Press and
hold the pad to increase the time or temperature by
larger amounts.
6. PROBE. Press this pad when using the probe to
cook food.
7. OVEN LIGHT. Press this pad to turn the oven
light on or off.
8. DECREASE. Short taps to this pad decrease the
time or temperature by small amounts. Press and
hold the pad to decrease the time or temperature by
larger amounts.
9. STOP TIME. Use this pad along with the COOK
TIME or AUTO SELF CLEAN pad to set the oven
to start and stop automatically at a time you select.
10. COOK TIME. Use this pad for Timed Bake,
Timed Convection Bake and Timed Convection
Roast operations.
11. CLOCK. To set the clock, first press the CLOCK
pad. Then press the INCREASE or DECREASE
pad to set the time of day. Press the CLOCK pad
to start.
—
12. TIMER ON/OFF. Press this pad to select the
timer function. The timer does not control oven
operations. The timer can time up to 9 hours and
55 minutes.
To set the timer, first press the TIMER ON/OFF
pad. Then press the INCREASE or DECREASE
pad to change the time.
To cancel the timer, press and hold the TIMER
ON/OFF pad until the word “TIMER” disappears
from the display.
13. AUTO SELF CLEAN. Press this pad to select
the self-cleaning function. See the Operating the
Self-Cleaning Oven section.
14. BROIL. Press this pad to select the broil function.
15.
CONV.
ROAST. Press this pad to select roasting
with convection
If “F-and a number” flash in the display
and the oven control signals, this indicates
function error code. Press the
CLEAWOFF pad.
Allow the oven to
cool
for one hour. Put the oven
back into operation. If the function error code
repeats, disconnect the power
to
the oven and call
for service.
6