Filter
Top Products
Fig. 19
4. Reverse procedure to install.
Fan Cover
1. Open door.
2. Remove nut securing fan cover to top of cavity.
3. Grab deflector edge and pivot edge toward you
to disengage cover from studs.
4. Slide cover off studs at opposite side and remove
cover.
NOTE: Fan cover can be removed thru either door in
the same manner.
VIEW - AS LOOKING THROUGH DOOR GLASS
5. Reverse procedure to install.
NOTE: Make sure all six studs are engaged properly
and that the cover does not hang down.
DOOR
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1. Remove Left Side Cover.
2. Open oven door and pull inner oven door to
overcome magnet hold to main door.
Fig. 21
3. Lift inner door hinge pins out of hinge bushings
and lay door on a flat padded surface.
Fig. 22
4. Remove screws securing facade to oven.
KA SERIES ELECTRIC ROTARY OVENS - REMOVAL AND REPLACEMENT OF PARTS
Page 11 of 72 F25294 Rev. A (0412)