Filter
Top Products
10. Remove four screws, washers and nuts securing
gearbox to motor support.
11. Pivot gearbox away from oven and work crank
arm out of hole in side wall.
12. Remove gasket bracket and gasket if not already
removed.
Fig. 119
13. Install in reverse order.
14. Snug but do not tighten screws securing gasket
bracket at this time. It must be loose during the
drive motor adjustment procedure.
15. Continue to Drive Motor Adjustment.
KA SERIES ELECTRIC ROTARY OVENS - REMOVAL AND REPLACEMENT OF PARTS
Page 35 of 72 F25294 Rev. A (0412)