Filter
Top Products
MEAT PROBE MINI JACK
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1. Remove Right Side Cover.
2. Mini jack is located under power switch.
Fig. 67
3. Use a small screwdriver or similar object to
carefully pry tabs out and work retainer clip off
jack.
NOTE: Jack shown removed from oven for view. Also
notice that wires are polarity sensitive and must be
connected properly for correct operation.
Fig. 68
4. Identify and disconnect wires from mini jack
terminals.
5. Reverse procedure to install.
CAPACITORS
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1. Remove
Right Side Cover.
2. Disconnect wires from capacitor being replaced.
3. Remove hardware securing capacitor being
replaced and remove capacitor.
Fig. 69
KA SERIES ELECTRIC ROTARY OVENS - REMOVAL AND REPLACEMENT OF PARTS
F25294 Rev. A (0412) Page 22 of 72