Filter
Top Products
Fig. 62
4. Unplug keypad cable from display board.
5. Remove eight nuts and washers securing board
to panel and lift board off studs.
Fig. 63
6. Remove spacers from studs on display panel.
Fig. 64
7. Reverse procedure to install.
ROTOR STOP/START SWITCH
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1. Remove Right Side Cover.
2. Unscrew black knob and remove from switch.
Fig. 65
3. Unscrew mounting nut.
Fig. 66
4. Pull switch out of hole.
5. Identify and disconnect wires.
6. Reverse procedure to install.
KA SERIES ELECTRIC ROTARY OVENS - REMOVAL AND REPLACEMENT OF PARTS
Page 21 of 72 F25294 Rev. A (0412)