Filter
Top Products
Fig. 58
Fig. 59
4. Push switch out of bezel.
5. Reverse procedure to install.
DISPLAY BOARD AND KEYPAD
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
Certain components in this system are
subject to damage by electrostatic discharge during
field repairs. A field service grounding kit is available
to prevent damage. The field service grounding kit
must be used anytime the control board is handled.
TSB 1381 KA7E ROTARY OVEN SCRAMBLED VFD
DISPLAY.
1. Remove
Right Side Cover.
2. Unplug ribbon cable from display board.
A. Spread retaining clips to extract plug from
socket.
Fig. 60
3. Remove six nuts securing display panel with
display board attached and lift out of oven.
Fig. 61
KA SERIES ELECTRIC ROTARY OVENS - REMOVAL AND REPLACEMENT OF PARTS
F25294 Rev. A (0412) Page 20 of 72