Filter
Top Products
OV500 SERIES RACK OVEN - SERVICE PROCEDURES AND ADJUSTMENTS
7598
6. Remove door catches from door jamb.
A. Remove screws on opposite side of door
jamb and install door strike.
B. Install screws onto other side of door jamb
catch was removed from.
C. Install both door catches to opposite door
jamb.
7. Adjust the DOOR as outlined under SERVICE
PROCEDURE AND ADJUSTMENTS.
8. Install door sweep onto door assembly at
bottom of door.
SERVICE PROCEDURES AND ADJUSTMENTS
CONTROLLER INPUT/OUTPUT
STATUS DIAGNOSTIC
1. Turn oven on.
2. Check controller input/output status indicator
LED's on back of controller, for proper
input/output operation during various stages of
operation.
NOTE: Use oven sequence of operation in
conjunction with diagram.
3. Correct any improper input/output operation.
4. Check oven for proper operation.
F25361 (January 2010) Page 28 of 60