Filter
Top Products
OV500 SERIES RACK OVEN - SERVICE PROCEDURES AND ADJUSTMENTS
A. Verify that rack(s) wheels (when at the rear
location of the baking compartment) do not
drag on the oven floor.
B. If wheels drag, move upper lift switch to the
upper holes in upper & lower lift switch
bracket.
C. Test with oven at desired operating
temperature for 15 minutes.
D. If wheels drag, then oven floor or racks do
not meet manufactured specifications.
ACTUATOR LUBRICATION
1. Access actuator on top of oven.
2. There are two places to apply high temperature
grease.
A. Remove actuator housing cover.
1) Apply high temperature grease in
actuator gear box.
2) Install actuator housing cover.
B. Remove motor and gearbox assembly from
actuator.
1) Apply high temperature grease in top
of actuator housing.
2) Install motor and gearbox assembly.
3. Check for proper operation.
F25361 (January 2010)
Page 44 of 60