Filter
Top Products
4-7
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so could result in death or
electrical shock.
CAUTION: When you work on the built-in
oven, be careful when handling the sheet metal
parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
WARNING
REMOVING THE OVEN DOOR LATCH ASSEMBLY
4. Remove the wires from the terminals of
the solenoid and the latch and door
switches.
1. Disconnect the electrical power to the
oven.
2. Remove the control panel from the oven
(see page 4-2, steps 1 through 6 for the
procedure).
Air Vent
2 Top Screws
Solenoid
Door Switch
Latch Switch
2 Air Vent Screws
Oven Door Latch Assembly
3. Open the oven door and remove the two
front oven door latch mounting screws
from the air vent.
5. Remove the two top screws from the oven
door latch assembly and remove the as-
sembly.