Filter
Top Products
4-10
REMOVING THE BROIL ELEMENT
1. Disconnect the electrical power to the
oven.
2. Open the oven door and remove the racks
from inside the oven.
4. Carefully pull the element forward so that
the wires are through the oven liner holes,
and disconnect the wires from the termi-
nals.
CAUTION: When you work on the built-in
oven, be careful when handling the sheet metal
parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so could result in death or
electrical shock.
WARNING
3. Remove the two front bracket screws and
two rear bracket screws from the broil
element.
Broil
Element
Rear Bracket
Screws
Front Bracket
Screws
4 Element Wires