Filter
Top Products
,
For safety reasons, this
appliance may only be used when it
has been built in.
Setting the time of day
^
Connect the appliance to the mains
electrical supply.
12:00 and the m symbol will flash in
the display until the current time of
day is set. Before this, the time of
day will start to run from 12:00, as
the clock will start as soon as the
appliance is connected to the mains
electrical supply.
^
Turn the time selector to set the hour.
^
Press the m button.
^
Then turn the time selector to set the
minutes.
^
Press the m button to confirm, or wait
a few seconds.
The set time is now registered. The
colon between hours and minutes will
flash.
Altering the time of day
^
Press the m button.
The m symbol will flash in the display
and the current hour will light up for a
few seconds.
^
Use the time selector to alter the
hour.
^
Press the m button to confirm, or wait
a few seconds.
The m symbol will flash and the
current minutes will light up for a few
seconds.
^
Use the time selector to alter the
minutes.
^ Press the m button to confirm, or wait
for a few seconds.
Switching off the time of day
display
^ Press and hold in the m button until
the display goes dark.
Pressing and holding in the m button
again will bring back the time of day
display.
Time of day display
33