One favourite programme can be
saved in memory. This programme can
be used for your most frequently
cooked recipe. The programme can
have up to 3 stages (e.g.: 1 minute at
600 W, followed by 2 minutes on Grill
and finally 3 minutes at 150 W + Grill).
Programming
(The example given is for a 3-stage
programme).
^
First select the function for the first
stage.
^ Then select the duration.
^ Press the M button.
1 will light up in the display, and 2 will
flash.
^
Then select the second function and
duration.
^
Press button M again.
2 will light up in the display, and 3 will
flash.
^
Now select the third function and
duration, and then press the M
button.
After this third step, you can use the M
button to scroll through your entry and
check it.
^
When you have finished
programming, turn the power
selector to the 12 o'clock position.
^
Start the programme to save the
entry. Only ever run the entire
programme with food in the
appliance.
If there is no food in the appliance,
then press the Stop/C button twice
as soon as you have started the
programme so that the appliance is
not damaged by having no food in
it.
1- and 2-stage programmes can be
saved in the same way. The
programming process is finished when
the power selector is in the 12 o'clock
position and the Start button has been
pressed, while pressing the M button
shows the next stage.
To change an entry
^
Entering a new programme overrides
the previously saved programme.
Saving your favourite programme (Memory)
56