Filter
Top Products
Interrupting or re-starting a
programme
At any time you can...
...interrupt a programme:
^
Press the Stop/C button, or open the
appliance door.
The duration stops counting down.
...continue a programme:
^
Close the door and press Start.
The programme will continue.
Altering settings
If you discover after starting a
programme that...
...themicrowave power level is too
high or too low, you can
^ select a new level.
...theduration set is too short or too
long, you can
^
interrupt the programme (press the
Stop/C button once), use the time
selector to set a new duration and
continue the programme (press the
Start button),
or alternatively:
^
the cooking duration can be
increased by pressing the Start
button during operation. Each time
the Start button is pressed, the
cooking duration is increased by
another minute. (Exception: the
increased cooking duration is in
increments of 30 seconds when the
microwave oven is being used on
maximum power.)
Cancelling a programme
^
Press the Stop/C button twice.
At the end of a programme
An audible tone will sound when the
cooking programme is complete. The
oven interior lighting goes out.
The audible tone will sound briefly as a
reminder every 5 minutes for
20 minutes after the end of the
programme.
^
If you want to stop the audible tone,
press the Stop/C button.
Automatic keeping warm
function
The keeping warm function will switch
on automatically at 80 W for a maximum
of 15 minutes approx. 2 minutes after
the end of a cooking programme which
has used at least 450 W, providing the
door remains closed and no buttons
are pressed.
h,80WandH:H will light up in the
display.
Opening the door or operating one of
the buttons or selectors while the
keeping warm function is in progress
cancels the function.
The keeping warm function cannot be
set as a separate function.
Operation
37