Filter
Top Products
16
Model H63Important: To the Operator
Pressing the <-- -- arrow key or the -- --> arrow key
will move the cursor left or right respectively. Pressing
the MENU/SEL key while under “ENABLE” will accept
the selection and will automatically increase the clock
one hour at 2:00 a.m . on thefirst Sunday in every April.
It will decrease one hour at 2:00 a.m. on the last
Sunday in ever y October. Pr essing the MENU/SEL
key while under “DISABLE” will accept the selection
and operate normally. Pressing the MENU/SEL key
again will acc ept the s election and return to the
OPERATOR MENU.
Screen “D” is SYSTEM INFORMATION. The first
screen will indicate the soft ware ver sion used in the
unit.
SOFTWARE VERSION
H63 Control UVC2
Vers ion 2.00
SEL
Press the MENU/SEL key to v iew the second screen
of the SYSTEM INFORMATION display. This screen
will indicate the version number and number of
language s trings.
Language
V1.10r00 English 457
SEL
Press the MENU/S EL key to view the third screen of
the SYSTEM INFORMATION display. This screen will
indicate the Bill of Material number and serial number
for the unit. Press the MENU/SEL key once to return
to the Operator Menu.
B.O.M. 0H6333C000
S/N K0000000
SEL
Screen “E” is AUTO HE AT T IME. This screen is used
to set the time of day in wh ich the heat treatment cycle
will start. Move the curs or under the number y ou wish
to change. Press the plus key to increase the number;
press the minus key to decrease the number. When
the desired time appears, press the MENU/S EL key
once to return to the OPERATOR MENU.
AUTO HEAT TIME
TIME: 12:00 AM
-- --
<------ ------> +++ ------ SEL
Screen “F” is CURRENT CONDITIONS. This screen
gives the v iscosity of the product and the hopper and
barrel temperatures. The last line of t he display is the
compressor c ountdown safety timer. T he safety tim er
prevents the compressor fr om running mor e than 11
minutes (other than during the cooling phase of the
heat treatment cycle).
Press the ME NU/SEL key once to view the
SERVINGS COUNTER screen.
VISC HOPPER BARREL
0 38.5 28.5
TIME C 11:00 11:00
The SERVINGS COUNTER s creen indicates the
number of times the draw switch has closed (number
of draws) sincethe las t brush cleaning or since the last
serving counter reset. A maxim um of 32,767 draws
can be recor ded; an additional draw will cause the
counter torestartat zero.Pressing the MENU/SELkey
will r eturn the display to t he Oper ator Menu.
SERVINGS COUNTER
DRAWS
12
SEL
Draws are counted during the AUTO mode of
operation only.