Filter
Top Products
31
Model H63 Troubleshooting Guide
Section 8 Troubleshooting Guide
PROBLEM PROBABLE CAUSE REMEDY
PAGE
REF.
1. Soft lock message
appears on LCD.
a. More than 24 hours since
the last heat cycle.
a. Th e fr eezer m ust go
through a heat cycle every
24 hour s. The f reezer
must now be
disassembled and brush
cleaned or placed in a
heat cycl e.
14
b. Th e power switch is in the
OFF posit ion.
b. Th e power switch must be
in the ON position. The
freezer must now be
disassembled and brush
cleaned or placed in a
heat cycl e.
14
c. The freezer is not in the
AUTO or STANDBY
mode.
c. The freezer must be in the
AUTO or STANDBY
mode. The freezer must
now be disassembled and
brush cleaned or placed in
a heat cycle.
14
d. Mix out c ondition. d. Th e level of mix in the mix
hopper must be above the
MIX OUT probe before
starting the heat cycle.
The freezer must now be
disassembled and brush
cleaned or placed in a
heat cycl e.
14
e. Th e agitator is not
installed.
e. Th e agitator must be
cleaned and installed
before start ing the heat
cycle. The freezer must
now be disassembled and
brush cleaned.
24
f. The agitator is not
rotating.
f. The agitator must be
cleaned before s tarting
the heat cycle.
Disassemble the freezer
and br ush clean.
24