Filter
Top Products
21
Model H63 Operat ing Procedures
Step 6
Install the rear drip pan. Slide the drip pan into the hole
in the fr ont panel.
Figure 12
Step 7
Inst all the torque ar m. Position the torque arm by
slipping it up through the slot in the operating arm, and
then down intothe hole i nthetorque rotor shaft. Check
the t orque arm by moving it back and forth to be sure
it moves freely and easily.
Step 8
Install the front drip tray and splash shield.
Figure 13
Step 9
Slide the three o--rings into th e grooves of the inner air
tube.
Figure 14
Slide the t wo o--rings into the grooves of t he outer air
tube.
Figure 15
Step 10
Lay the inner air tube, outer air tube, and agitator in the
bottom of the mix hopper for s anitizing.
Figure 16