Filter
Top Products
30
Models H62 & H63Operating Procedures
DO NOT use a water jet to clean or rinse the
freezer. Failure to follow these instructions may result
in serious electrical shock.
Step 5
Return to the freezer with a small amount of sanitizing
solution. Dip the end brush into the sanitizing solution
and brush clean the door spout and bottom of the draw
valve.
Note: To assure sanitary conditions are maintained,
brush clean each item for a total of 60 seconds,
repeatedly dipping the brush in sanitizing solution.
Step 6
Rinse a single service towel in sanitizing solution and
wipe down the freezer door and area around the
bottom of the freezer door.
Step 7
Install the front drip tray and splash shield.
Figure 30
Step 8
Press the AUTO key to resume normal operation.
When the unit cycles off, product is ready to serve.
Figure 31
Manual Brush Cleaning
THIS PROCEDURE MUST BE PERFORMED
EVERY 14 DAYS.
ALWAYS FOLLOW LOCAL HEALTH CODES.
To disassemble your unit, the following items will be
needed:
S T wo cleaning pails
S Necessary brushes (provided with freezer)
S Cleaning solution
S Single service towels