Taylor H62 & H63 Freezer User Manual


 
36
Models H62 & H63Important: Operator Checklist
Winter Storage
If the place of business i s to be closed during the winter
months, it is important to protect the freezer by
following certain precautions, particularly if the
building is subject to freezing conditions.
On water cooled freezers, disconnect the water
supply. Relieve pressure on spring in water valve. Use
air pressure on the outlet side to blow out any water
remaining in the condenser. This is extremely
important. Failure to follow this procedure may cause
severe and costly damage to the refrigeration system.
Disconnect the freezer from the main power source to
prevent possible electrical damage.
Your local Taylor Distributor can perform this service
for you.
Wrap detachable parts of the freezer (such as the
beater, blades, the drive shaft, and the freezer door)
and place them in a dry, protected place. Rubber trim
parts and gaskets can be protected by wrapping with
moisture--proof paper. All parts should be thoroughly
cleaned of dried mix or lubrication accumulations
which attract mice and other vermin.