Filter
Top Products
15
Model 8756 Important: To the Operator
Wash
When the WASH key is pressed, the light comes on,
indicating beater motor operation. The STANDBY or
AUTO modes must be cancelled first to activate the
WASH mode.
Auto
When the AUTO key is pressed, the light comes on,
indicating the main refrigeration system has been
activated. In the AUTO mode, the WASH or
STANDBY functions are automatically cancelled.
The MIX REF function is automatically locked in to
maintain the mix in the cabinet and the PUMP
function is locked in to allow air/mix pump operation
as required.
Pump
When the PUMP key is pressed, the light comes on
indicating the air/mix pump will operate as required.
Note: An indicating light and an audible tone will
sound whenever a mode of operation has been
pressed. To cancel any function, press the key
again and the light and mode of operation will shut
off.
Adjustable Draw Handle
This unit features an adjustable draw handle to
provide the best portion control, giving a better,
consistent quality to your product and controlling
costs. The draw handle should be adjusted to
provide a flow rate of 5 to 7-1/2 oz. of product by
weight per 10 seconds. To increase the flow rate,
turn the screw counterclockwise. To decrease the
flow rate, turn the screw clockwise.
In addition, for purposes of sanitizing and rinsing,
the flow rate can be increased by removing the pivot
pin and placing the restrictive bar on the top.
When drawing product, always have the restrictive
bar on the bottom.
IMPORTANT! When dispensing product, pull
only one draw handle at a time.