Filter
Top Products
20
Model 8756Operating Procedures
Step 15
Slide the fork of each draw handle into the slot of the
draw valves, starting from the right. Slide the long
pivot pin through the right and middle draw handles.
Secure the left draw handle with the short pivot pin.
Figure 21
Note: This unit features adjustable draw handles to
provide the best portion control, giving a better
consistency quality to your product and controlling
costs. The draw handles can be adjusted for
different flow rates. See page 15 for more
information on adjusting these handles.
Step 16
Snap the design caps over the bottom of each door
spout.
Figure 22
Step 17
Slide the rear drip pan into the hole i n the side
panel.
Figure 23
Step 18
Install the front drip tray and the splash shield
beneath the door spouts.
Figure 24