Taylor Model 8756 Frozen Dessert Maker User Manual


 
22
Model 8756Operating Procedures
Step 5
Insert the piston, air orifice end first, into the pump
body and push upward.
Figure 30
Note: The drive hole in the piston must be visible
through the hole in the pump body.
Figure 31
Step 6
Slide the two check bands and the two o-rings into
the grooves on the liquid valve body. Do not
lubricate the check bands or o-rings.
Figure 32
Step 7
Insert the liquid valve body by aligning the steel
button at the base of the liquid valve body with the
cut-out groove at the bottom of the pump body.
Figure 33