Filter
Top Products
19
Model 8756 Operating Procedures
Step 11
With the door seated on the freezer studs, install the
short handscrews on the bottom and the long
handscrews on the top. Tighten the handscrews
equally in a criss-cross pattern until the door is snug.
Figure 17
Step 12
Slide the two o-rings into the grooves on the draw
valves. Lubricate the o-rings.
Figure 18
Step 13
Lubricate the inside of the freezer door spouts, top
and bottom. Insert the draw valves from the bottom
of the door until the slot in the draw valves comes
into view.
Figure 19
Step 14
Slide the o-rings into the grooves on the pivot pins.
Lubricate the o-rings.
Figure 20