Filter
Top Products
Usin Your Microwave Oven
Cont nued
B
Using the Minute Timer
The microwave oven controls can be used as a
minute timer. Use COOK TIME at “0” Cook
Power for timing up to 99 minutes, 99 seconds.
NOTE: The oven will not operate while the
Minute Timer is in use.
1.
2.
3.
4.
5.
Touch COOK TIME. The STAGE 1 Indicator
will come on and the Display will show ‘OH’”
and
“O/O
POWER”. The TIME Indicator will start
to flash.
Touch Number Pads for the minutes and
seconds you want. The Display will show the
numbers you touched in the order you
touched them. This example shows 1 minute,
45 seconds.
Touch COOK POWER. The % POWER
Indicator will start to flash.
Touch the “0” Number Pad. The small Display
will show “00”. This tells you the oven will be
operating at 0% power.
Touch START/ENTER.
NOTE: If you hear the fan start when you
touch START/ENTER, you have not set the
Cook Power properly. Touch OFF/CANCEL
and start over.
The STAGE 1 and % POWER Indicators will stay
on to show you that the timer is running.
The Display counts down to show you how
much time is left. During the countdown the oven
will be dark and the fan will be off.
When the set time ends, “End” will show on the
Display and two short tones and one long tone
will sound. (You can stop the tones by opening
the door or by touching OFF/CANCEL.) “End” will
remain on the Display until the door is opened or
OFF/CANCEL is touched. The Display will then
show the time of day.
NOTE: Opening the oven door stops the count-
down. Close the door and touch START/ENTER
to continue the timing countdown.
22