Filter
Top Products
SmartMedia card file operations
PSR-K1 Owner’s Manual
63
File Load
This operation loads data of User files or style files on SmartMedia card to the internal
memory.
ᕡ With a SmartMedia card containing the files to be loaded inserted and press the
[FILE CONTROL] button.
ᕢ Call up the Load page by using the CATEGORY buttons [ ]/[ ].
ᕣ Select the desired file to be loaded.
You can instantly jump to the first file (the lowest numbered file) in the list by
simultaneously pressing both the [+] and [–] buttons.
ᕤ Press the [EXECUTE] button.
A “Load OK?” message appears, asking if you want to
load the data.
ᕥ Press the [EXECUTE] button or the [+] button to execute
the operation.
ᕦ When the Load operation is completed, a “Completed” message appears.
To return to the MAIN display, press the [EXIT] button.
Saving User data files
This operation lets you save your User songs (songs #101 – 105) and the User style (style #136) as well as your Registra-
tion Memory settings to SmartMedia card as a User data file.
ᕡ With a formatted SmartMedia card inserted in the card slot and press the [FILE
CONTROL] button.
ᕢ Call up the User File Save page by using the CATEGORY buttons [ ]/[ ].
A file name is automatically assigned to the file you are saving here.
● Replacing (overwriting) an existing file
If you want to replace an existing User data file in the SmartMedia card with new
data, select the appropriate file name with the dial or the [+]/[–] buttons, then go
directly to step
ᕤ below.
• When loading style files, data
for internal style number 136 is
overwritten and lost. Make sure
to save important data to
SmartMedia card before load-
ing.
f
r
• Style File data must be in the root
(top) directory and not inside a
folder. Any Style File data inside a
folder will not be found.
NOTE
• If no files are contained in the
SmartMedia card, a “File is not
found” message appears and the
load operation cannot be executed.
NOTE
• To cancel the operation, press the
[–] button in Step ᕤ .
NOTE
• You cannot cancel the operation while it is being executed (“Loading...” message is
shown). Never turn off the power or pull out the SmartMedia card in this condition.
f
r
• If there is no User data to be saved,
a “Save data is not found” mes-
sage appears and the save opera-
tion cannot be executed.
• Up to 894 songs can be saved to a
single SmartMedia card, irrespec-
tive of the data capacity.
• If the write-protect function on the
SmartMedia card is enabled, a
“The media is write-protected.”
message appears and the save
operation cannot be executed.
• If there is no available memory
space on the SmartMedia card for
saving the data, a “Memory capac-
ity is full.” message appears and
the save operation cannot be exe-
cuted. To recover memory space
for saving, delete any unnecessary
files.
• Other messages than those
described above may be shown.
For a complete list of messages you
may encounter while using Smart-
Media cards, see page 82.
NOTE