Filter
Top Products
Accessory CD-ROM Installation Guide
PSR-K1 Owner’s Manual
73
Installation for Windows 98/Me/2000/XP
ᕡ Start the computer.
For Windows 2000/XP execute the following steps after the
computer is started.
In Windows 2000, use the “Administrator” account to log in,
then select [My Computer]
→ [Control Panel] → [System]
→ [Hardware] → [Driver Signing] → [File Signature Verifi-
cation]. Check the radio button next to “Ignore — Install all
files, regardless of file signature,” then click “OK.”
In Windows XP, select [Start] → [Control Panel]. (If the con-
trol panel appears as shown below, click “Switch to Classic
View” at the upper left of the window to display all Control
Panel icons.) Next, go to [System]
→ [Hardware] → [Driver
Signing]
→ [File Signature Verification] and check the radio
button next to “Ignore — Install software, not want to check
(I),” then click “OK.” Click “OK” to close System Proper
-
ties, then close the Control Panel by clicking the close box
([x]) at the top right of the display.
ᕢ Insert the included CD-ROM in the CD-ROM drive.
ᕣ Check that the instrument is turned off, then connect the USB
terminal of the computer to the USB terminal of the instru
-
ment with a standard USB cable. Turn on the instrument, and
the message “Add New Hardware Wizard” (
Windows 98/Me/
2000
) or “Found New Hardware Wizard” (Windows XP)
automatically appears.
In Windows Me, check the radio button next to “Automatic
search for a better driver (Recommended)” of the Add New
Hardware Wizard, then click [Next]. The system searches for
the proper driver and installation starts automatically. Unless
you are manually installing a driver, skip directly to
step ᕨ
below. If a proper driver is not found, select “Specify the
location of the driver (Advanced)” and specify the
“USBdrv_“ folder on the CD-ROM
In Windows XP, check the radio button next to “Install the
software automatically (Recommended)” of the Found New
Hardware Wizard, then click [Next]. The system searches for
the proper driver and installation starts automatically. Unless
you are manually installing a driver, skip directly to
step ᕨ
below.
ᕤ Click [Next].
From the window that appears, you can select the method of
searching for the driver.
ᕥ Check the radio button next to “Search for a suitable driver for
my device. (Recommended),” then click [Next].
From this window, you can specify the location of the driver.
ᕦ Check “CD-ROM drive” and make sure all other items are
unchecked.
Click [Next]. The system searches for the driver in the CD-
ROM and prepares to install.
ᕧ After confirming that “YAMAHA USB MIDI Driver” is
shown in the driver search window, click [Next]. Installation
starts.
ᕨ When the installation is complete and a message appears to
indicate completion, click [Finish].
In Windows 2000/XP, the computer is restarted.
The driver has been properly installed.
■ Installing Song Filer
ᕡ Double-click on the “SongFiler_” folder in the CD-ROM.
The contents of the folder (including the “Setup.exe” file) are
displayed.
ᕢ Double-click on the file “Setup.exe”.
The setup dialog appears.
ᕣ Execute the installation following the onscreen directions.
For instructions and operation details, refer to the online help and
PDF manual.
* For the latest version of Song Filer, go to the following website.
http://www.yamahapkclub.com./english/download/
songfiler/songfiler.htm
• On some computers, it make take about ten seconds or so for this dis-
play to appear after the instrument is turned on.
NOTE
When using Song Filer, follow the steps below to set the
MIDI port to USB.
ᕡ Connect the instrument to your computer with a USB
cable.
ᕢ First, turn on your computer, then the instrument, and
finally, start Song Filer.
ᕣ Open the “MIDI Port Setting” from the Song Filer menu
bar, and select “USB.”
• In some cases, the system may ask you to insert a Windows CD-ROM
while it checks for the driver. If this happens, specify the “USBdrv_“
directory of the CD-ROM drive (for example, D:\USBdrv_\) in Win-
dows 98, or the “USBdrv2k_“ directory (for example,
D:\USBdrv2k_\) in Windows 2000, and continue the installation.
NOTE
• The exact pathname or location of the driver may differ depending on
the particular instrument and other variables.
NOTE
• On some computers, it make take about ten seconds or so for this
message to appear after installation is complete.
NOTE
• If a “LOW BATTERY!!” message appears during transmission of a
file using Song Filer, stop the transmission immediately.