Filter
Top Products
PSR-K1 Owner’s Manual
77
Function settings
The Function pages (found in the FUNCTION display) contain detailed controls and
settings for the voices, effects, split point, tuning of the instrument, and so on.
Commonly used settings can be called up by a button shortcut: Simply hold down a
button (for about a second) to directly call up the relevant setting page.
Calling up the setting pages
ᕡ Press the [FUNCTION] button to enter the FUNCTION display.
ᕢ Call up the desired page by using the CATEGORY buttons [ ]/[ ].
For details on the settings, refer to the FUNCTION settings List on the page 78.
The previous page’s title appears at the upper left of the display, and the next page’s title
appears at the upper right of the display.
ᕣ Set the value by using the dial, [+]/[–] buttons, or numeric keypad [0] – [9].
For ON/OFF settings, use the [+] button (ON) and [–] button (OFF).
For operations, use the [+] button to execute the operation, or the [–] button to cancel.
ᕤ Save your settings to SmartMedia card, if desired, by holding down the [FUNCTION] button.
All settings made in the FUNCTION display are memorized to the instrument when you set
them. However, all your custom settings are deleted when the power is turned off. If you
want to save any settings, you’ll need to back them up to SmartMedia card (with this step) so
that the next time you turn on the power, the settings are loaded from the SmartMedia card to
the instrument (page 84).
f
r
Previous page
Function
category
Next page
Current page
For directly setting
the value
For:
• Increasing value by 1
• Turning a setting on
• Executing an operation
For:
• Decreasing value by 1
• Turning a setting off
• Canceling an operation
For resetting a value/setting to
its original, default setting
Press and hold