X16 User Guide
- 38 -
Features
Ring Alert (Muted Ringing)
When an extension is busy, and a second call rings into the system, if the
extension is programmed to ring the extension will receive a ring alert, indicating
that there is a second call. Extensions that are busy on either a CO Line or
Extension call will receive a special “Warning Beep” for 5 seconds, or until the
line is answered by another extension.
Ringing (audible and visual)
When an extension is ringing, there will be an audible sound, which can be
adjusted from very low to very loud and a visual indication, flashing LED, to
indicate that the extension is ringing.
Ringer Volume Control
Using the digital telephone endpoint’s volume up and down keys, an extension
user may adjust the ringing volume of their telephone, while the call is ringing.
Room Monitor
Each telephone endpoint can be used as a “Room Monitor” device. If the “Auto
Mute” feature is enabled at the called location, the Mute key must be disabled
before monitoring can begin.
Set Time and Date (Automatic)
The system time and date can be set in system programming or by using Caller
ID. Caller ID, if subscribed for, will set the system’s time and date and
automatically reset the clock for daylight savings.
Set Relocation
Extension parameters such as voicemail will remain for up to 120 seconds when
an extension is unplugged or being relocated. To relocate an extension simply
unplug it and plug it into another extension port.
Note:
A “Endpoint Device box” may be needed when relocating an extension.
Speakerphone with LED
Each digital telephone endpoint is equipped as a speakerphone. When the
speakerphone is active, the LED will be illuminated.
Speed Dial Bins
The station has 12 speed dial bins; each can take up to 24 digits to be dialed.
-
15 -
Caller ID
4. Press Done – Press the navigation up or down key to change to
“Cancel” press the center to advance to the next or cancel.
Caller ID
Caller ID is a standard feature of the system. When received from the
telephone network, it will identify caller and synchronize the date and
time of the system. Each call into the system is stored in the Caller ID
list.
To review the Caller ID list, Press the Caller ID Button. To delete
one of
the entries, press the delete button while it is displayed. To delete all of
the entries in the Caller ID list, press the Caller ID button, and then the
delete button.
Press the delete key to delete all caller ID entries.
07:15P 01/17 WED
NEW CID:04 301
Caller ID
ALL CID:00
NEW CID:04
