X16 User Guide
- 26 -
Programming
Programmable Feature Buttons
Each digital telephone endpoint has twelve (12) programmable feature
buttons, which can be customized by each extension user. There are
three programmable feature button categories.
Selections Description
DSS/BLF Key Direct Station Select (DSS) – allows extension
users to press one button to dial another
extension. In addition, the DSS button doubles as
Busy Lamp Field (BLF). The BLF shows the
status, idle or busy, of other extensions.
SPD Key Each of the (twelve) 12 buttons can be
programmed as a speed dial key. Input the
number to be dialed once the key is identified as
a speed key. Simply press the speed key to dial
the number once it is programmed. “
Feature
+
7” will enter a pause, shown as a P.
Feature Key Feature + 1 = Record
Feature + 2 = Open
Feature + 3 = Flash Key
Feature + 4
= DND
Feature + 5 = Mute
Feature + 6 = Conference
Feature + 7 = Pause
Feature + 8 = Redial
Feature + 9 = Headset
Feature + 0 = All Page
Feature + * = Open
Feature + # = Open
-
27 -
Programming
Programming Steps
Step 1 – Press the programming button
Step 2 – Select phone setup
Step 3 – Press the select (center) navigation key
Step 4 – Press the down navigation key and select “Feature Key”
Step 5 – Press the center navigation button to begin
Step 6 – Press the up or down navigation key to select the feature
button to be programmed or press the feature key to be
programmed.
The display will show the selected FTR button. The display below
shows FTR#01, FTR button 1, was pressed.
Step 7 – Press the Program button to exit programming, and not modify
the current button programming or press the center button to change
the current setting.
Step 8 – Using the up or down navigation keys, select between DSS/BLF,
Speed Key, or Feature.
Step 9 – Press the select button to display the current programmed
function.
Step 10 – Enter the appropriate extension, speed dial number or use the
up or down navigation keys and select the desired feature.
Step 11 – Press the select button to confirm the selection.
AUTO MUTE
Select FTR Key
AUTO MUTE
FTR#01:DSS/BLF
=301
AUTO MUTE
FTR#01
=DSS/BLF Key
