X16 User Guide
- 30 -
Features
CO Line Ringing – Per Extension
Each extension can be programmed to ring when a call is received on a specific
CO Line. At default, all CO Lines ring on all extensions. This may not be ideal for
all installations, so each extension can be programmed to ring, or not ring.
Conference – 3-way
An extension may conference two external parties, or one internal and one
external party, together so that they may all converse. (Privacy Release may
affect the operation of this feature) A conference call cannot be recorded. The
system can have two, 3-way calls simultaneously.
1) Put the first call on Hold
2) Make the second intercom call or CO Line call. After the third party
answers the call press the “Conf” button.
3) The three parties will be joined together in a conference.
Conference – Express Conference
Express Conference is a quick and easy way to allow another extension to join in
on an existing CO Line call. While speaking with an outside party, the extension
user presses the Line button, which is lit green, allowing another party to press
the busy (lit blue) line button on their telephone and join in on the existing
conversation.
If the first extension hangs up, the second extension may continue to speak with
the outside party. The second extension’s line button will turn green allowing
the second extension to press the button and have someone else join in on the
call.
Operation:
Step 1: An extension (301) makes an outbound or answers an incoming call.
Step 2: The extension user presses the same Line button again.
Step 3: Another extension (302) may now press the busy line button on their
telephone and join in on the existing call. If extension 301 hangs up, the call is
“passed” to extension 302. 302 may press the Line button and have another or
the same extension, join the call.
AUTO MUTE
Conf#1+3 00:00
99135992583
-
23 -
Programming
Ringer Type – Each extension user can select
from 6 different ring tones for each of the 6
CO Lines. Press the navigation key up or
down to scroll through the different tones.
Call Forward – Each extension can select
where calls will be forwarded to when they
are busy or when a call goes unanswered.
Waiting Time – The call waiting time is the
amount of time a call will ring before it is sent
to the programmed destination. Waiting Time
uses the up or down navigation key to select
from 10 to 25 seconds.
Line1 Ring Type
=Type-1
Line2 Ring Type
=Type-1
Line3 Ring Type
=Type-1
Line4 Ring Type
=Type-1
Line5 Ring Type
=Type-1
Line6 Ring Type
=Type-1
AUTO MUTE
Ringer Type
AUTO MUTE
Call Forward
AUTO MUTE
Waiting Time
=10 Seconds
