Filter
Top Products
24
Operation (Continued)
Box Jams
If a box is improperly fabricated or filled, if the machine is mis-adjusted for the box being run, or if boxes enter
the machine incorrectly, a box jam may occur. To clear a box jam, follow these steps:
1. Determine cause of box jam so corrective action can be taken to prevent reoccurrence.
2. Turn off machine.
1. Turn off and disconnect air and electrical supplies before attempting to remove jammed
box or serious injury could occur.
2. Wait for flap kicker to reach down position as shown in Figure 3-11, to avoid being hit or
startled by its movement.
WARNINGS
3. Crank upper head up and/or drive belts out until box is free.
4. Carefully pull box out of machine.
1. Keep hands away from upper and lower taping head cut-off knife as knife is extremely
sharp and can cause severe injury.
2. When reaching into the machine to remove a jammed box, use proper posture to
prevent back or other injuries.
WARNINGS
5. Readjust upper head and drive belts according to "Machine Adjustment for Box Size" instructions on pages
19 - 23.
6. Connect air and electrical supplies.
7. Turn machine "On" only when it is safe to do so!