Filter
Top Products
43
Spare and Miscellaneous Parts
Spare Parts
The following parts are normal wear items and should be ordered and kept on hand as used.
Qty. Ref. No. Part Number Description
2 4186-49 (Sec. I) 78-8076-4865-0 Belt – Drive W/Pin
Qty. Ref. No. Part Number Description
1 2950-10 (Sec. II) 78-8070-1274-1 Spring – Upper Extension (Silver)
1 2955-10 (Sec. II) 78-8070-1273-3 Spring – Lower Extension (Black)
2 2952-2 (Sec. II) 78-8028-7899-7 Knife – 89 mm/3.5 Inch
4 2952-12 (Sec. II) 78-8052-6602-6 Spring – Cutter
Tool and Parts Kit
A tool kit, part number 78-8060-8476-6, is available as a stock item. The kit contains the necessary open end
and hex socket wrenches for use with the metric fasteners on the case sealer. The threading tool, part number
78-8076-4726-4 contained in above kit is also available as a replacement stock item.
Replacement Parts Ordering Information and Service
Refer to first page of this manual "Replacement Parts and Service Information" for parts ordering information.
Label Kit
In the event that any labels are damaged or destroyed, they must be replaced to ensure operator safety. A label
kit, part number 78-8113-6876-6 is available as a stock item. It contains all the safety labels used on the 800af3
Adjustable Case Sealer. Labels can also be purchased separately. See Parts Drawing/List, pages 86 and 87.
In addition, a tool/spare parts kit supplied with the 800af3 Adjustable Case Sealer contains the following spare
parts:
All the above listed parts can be ordered separately and when used should be ordered and kept on hand for
spares.
Also see Section II, Page 17 for recommended taping head spare parts.