4
Important Safeguards (Continued)
The "Warning – Moving Flap Kicker" labels,
shown in Figure 1-4, are attached to the machine
guards on the infeed end, close to the top. These
labels remind the operator and service personnel to
keep away from flap kicker when machine is running.
Two emergency stop switches are located, one on
each side of the machine, on the guard at the center
of the machine. The "Stop" label, shown in Figure
1-6, is located near these switches and remind
operators and other personnel of the function of
these switches.
Figure 1-4 – Moving Flap Kicker
The "Caution – Pinch Point" label, shown in
Figure 1-5, is attached to the back side of the
compression roller brackets on both sides of the
machine. The label reminds operator to keep hands
away from compression rollers when machine is
running.
Figure 1-6 – Stop and On/Off Labels
The "On/Off" label, shown in Figure 1-7, is located
next to the electrical on/off switch on the guard (left
side) at the infeed end of the machine. The label
reminds operators of the function of this switch.
Figure 1-5 – Pinch Point Caution Label Figure 1-7 – On/Off Label