Filter
Top Products
3
Important Safeguards
Figure 1-2 – Electrical Warning Label
Figure 1-3 – Box Drive Belt Warning Label
This safety alert symbol identifies
important messages in this manual.
READ AND UNDERSTAND THEM BEFORE
INSTALLING OR OPERATING THIS
EQUIPMENT.
Important – In the event the following safety
labels are damaged or destroyed, they must be
replaced to ensure operator safety. A label
kit, part number 78-8113-6881-6 is available as
a stock item or individual labels can be ordered.
See Parts Illustration/List, Section I, pages 86 &
87.
The "Warning – Sharp Knife" label (A), shown in
Figure 1-1, is attached to both sides of the upper
frame at the location of the cut-off knife on the upper
taping heads. The "Warning – Sharp Knife" label
(B), shown in Figure 1-1, is attached to the orange
cut-off knife guard on both taping heads. The labels
warn operators and service personnel of the very
sharp knife used to cut the tape at the end of the
tape application.
The "Warning – Hazardous Voltage" label, shown
in Figure 1-2, is attached to the cover of the
electrical control box on the lower right side of the
machine frame. The label warns service personnel
to unplug the power supply before attempting any
service work on the case sealer.
The "Warning – Keep Hands Away From Moving
Belts" labels, shown in Figure 1-3, are located on
the infeed end of the machine bed on each side.
The labels warn operators to keep hands away from
this area when drive belts are running.
Figure 1-1 – Knife Warning Label