Agilent Technologies 8156A Water Dispenser User Manual


 
252
Cleaning Information
What do I need for proper cleaning?
hygiene products (for example, a supermarket or a chemists shop).
You may be able to obtain various sizes of swab. If this is the case,
select the smallest size for your smallest devices.
Ensure that you use natural cotton swabs. Foam swabs will often
leave behind filmy deposits after cleaning.
Use care when cleaning, and avoid pressing too hard onto your
optical device with the swab. Too much pressure may scratch the
surface, and could cause your device to become misaligned. It is
advisable to rub gently over the surface using only a small circular
movement.
Swabs should be used straight out of the packet, and never used
twice. This is because dust and dirt in the atmosphere, or from a
first cleaning, may collect on your swab and scratch the surface of
your optical device.
Soft tissues
These are available from most stores and distributors of medical
and hygiene products such as supermarkets or chemists shops.
We recommend that you do not use normal cotton tissues, but
multi-layered soft tissues made from non-recycled cellulose.
Cellulose tissues are very absorbent and softer. Consequently, they
will not scratch the surface of your device over time.
Use care when cleaning, and avoid pressing on your optical device
with the tissue. Pressing too hard may lead to scratches on the
surface or misalignment of your device. Just rub gently over the
surface using a small circular movement.
Use only clean, fresh soft tissues and never apply them twice. Any
dust and dirt from the air which collects on your tissue, or which
has gathered after initial cleaning, may scratch and pollute your
optical device.
Pipe cleaner
Pipe cleaners can be purchased from tobacconists, and come in
various shapes and sizes.The most suitable one to select for