Filter
Top Products
2WKHU6DIHW\,QIRUPDWLRQ
• Adjustments described in this manual are performed with power
supplied to the instrument while protective covers are removed.
Be aware that energy at many points, if contacted, result in
personal injury.
• Do not install substitute parts or perform any unauthorized
modification to the instrument.
• Be aware that capacitors inside the instrument may still be
charged even if the instrument has been connected from its
source of supply.
:$51,1* To avoid hazardous electrical shock, do not operate the instrument
if there are any signs of damage to any portion of the outer
enclosure (covers, panels, and so on).
:$51,1* To avoid the possibility of injury or death, you must observe the
following precautions before powering on the instrument.
– If this instrument is to be energized via an autotransformer for
voltage reduction, ensure that the Common terminal connects
to the earthed pole of the power source.
– Insert the power cable plug only into a socket outlet provided
with a protective earth contact. Do not negate this protective
action by the using an extension cord without a protective
conductor.
– Before switching on the instrument, the protective earth
terminal of the instrument must be connected to a protective
conductor. You can do this by using the power cord supplied
with the instrument.
– It is prohibited to interrupt the protective earth connection
intentionally.