Filter
Top Products
34 __________________________________________________________Barco - DCMS - User Manual
Running the DCMS application
Get, Load, Save and Reset
Besides using the controls above, the user has the option to ‘Load’ a previously
defined set of parameters from file or ‘Save’ the current set to file.
Use the ‘Get’ function to acquire these settings by measurement. This is useful
for display matching purposes. How to match displays is explained in the section
“Using DCMS, Match displays” further in this document.
Use the ‘Reset’ function to perform a reset of all calibration parameters (gamma,
brightness,…) to their factory default values. Since not all prameters are
supported by every display, unsupported parameters will be skipped.
Calibrate
Once the parameters are set to the desired values, press the ‘Calibrate now...’
button to start the calibration routine. See the section on “Using DCMS, Calibrate
a display” for a complete explanation of the functionality behind this button.
Figure 20: Barco DCMS – Calibration window