Open as PDF
42 __________________________________________________________Barco - DCMS - User Manual
Display connection and calibration options
The Barco LCx-4x series displays (LCN/LCS-42/47) can be connected to the host
by means of a 3-wire straight (Rx-Rx, Tx-Tx, GND-GND) male-female cable. This
cable is provided in the DCMS package.
Figure 24: DCMS with LCx-4x
The LCx-4x display supports all the functionality of DCMS. Note that the option
to set the mid gray color is disabled. Mid gray calibration is not needed as a full
gray tracking is done. Gray tracking is done with the help of high precision look-
up tables embedded in the display and programmed by DCMS.
Note that a valid input source is required on this type of display for the internal
test pattern generator to work as the generator uses the applied input timing for
the generation of the test patches.