Filter
Top Products
Barco - DCMS - User Manual _________________________________________________________ 41
Display connection and calibration options
7 Display connection and calibration
options
7.1 ADP361
Connection
The Barco ADP361 can be connected to the host by means of a 3-wire straight
(Rx-Rx, Tx-Tx, GND-GND) male-female cable. This cable is provided in the DCMS
package.
Calibration options
Figure 23: DCMS with ADP361
The ADP display supports all the functionality of DCMS. However, for calibration
of the gray levels, only the mid gray (RGB 128, 128, 128) is calibrated. The color
of the mid gray point can be set to a value different from the white point as this
display is typically used in combination with the Barco MDP471 which has a mid
gray point that is slightly different from its white point.