Filter
Top Products
22
Control panel messages
ERROR DETECTION
When the START/STOP button has been pressed to
begin the process and there is a problem relating
to the sensor, beeps will sound twice and then the
LED Screen will flash the particular error message
specific to the problem.
There are 4 different error messages:
ERROR
MESSAGE
PROBLEM CORRECTION
E01
Attempting to use the bread machine
shortly after a loaf has been baked and its
interior will still be warm, that is the sensor
temperature will still be above 40°C.
Press START/STOP to reset, open the lid,
remove the bread pan and allow the oven
cavity sufficient time to cool. Refer to
“Beginner’s Guide to Baking Your First Loaf”
step 11, page 13.
E00
The bread machine is used in an extremely
cold environment.
Place the bread machine in a warmer
environment. Recommended room
temperature 20-25ºC.
EEE
Contact your nearest authorised Breville
Service Centre (refer to the back page for
details).
HHH
Contact your nearest authorised Breville
Service Centre (refer to the back page for
details).