Filter
Top Products
7
Know your Breville Baker’s Oven continued
THE CONTROL PANEL
The Control Panel is designed to perform several functions
and is activated by switching the bread machine on at the
power outlet. The LED Screen indicates the setting and
crust colour selection then the completion time for the
setting. The various buttons are used to set the functions
and to start or stop the bread machine. The buttons should
be pressed firmly. A soft beep sound is made as each
button is pressed.
LED SCREEN
The LED Screen shows firstly a setting (1-9) and crust colour (P, H or L) selected, then
automatically changes to show the total time for the setting. When the START/STOP
button is pressed to commence operation, the time displayed (in hours and minutes) is
the time remaining until the selected setting is completed.
MENU
Press this button to select one of the 9 automatic settings available. These settings
are listed on page 8-9 under “Bread and Dough Settings”. Each time the MENU button
is pressed, the setting is changed and a red light illuminates alongside the setting
selected. The setting selected is also shown on the LED Screen between 1 to 9.
CRUST
Press the CRUST button to select the 3 crust colours available for the bread settings
only. The colour selected is show on the LED Screen as a letter P, H or L.
P = MEDIUM crust colour
H = DARK crust colour
L = LIGHT crust colour
PRESET TIMER
Use the PRESET TIMER to delay the start of the selected program. Press the s or t
buttons (which will move time up or down in 10 minute increments) to preset the timer
(refer page 10).
START/STOP
The Baker’s Oven features a combined START/STOP button.
To START: Press the START/STOP button to commence the selected program or begin
timer countdown for the PRESET TIMER.
To STOP: To stop and cancel the program in the mid-cycle the START/STOP button
must be pressed down and held for approx. 2 seconds until the beep sounds and the
LED Screen is reset. DO NOT PRESS THE START/STOP BUTTON when checking the
bread as this will cancel the program. The machine will not continue to operate, in the
selected program.
Power Interruption Protection
The Breville Baker’s Oven has an in-built Power Interruption Protection system. If the power is interrupted
for 5 minutes or less (by a power failure or accidentally switching off at the power outlet), the program
will be automatically resumed when the power is restored.