Filter
Top Products
38
DISASSEMBLING THE BLENDER
DISASSEMBLING THE BLENDER
1. Ensure the Blender is turned off and the
power cord is unplugged from the wall
outlet.
2. Pull the Safety Locking Arm downwards
and over the grooves on either side of
the Blender Jug base.
3.
Remove the Blender Jug from the
Motor Base.
4. Remove the Blade Assembly (with
the Silicon Gasket still in place) from
the Blender Jug base by turning
counterclockwise. The stainless
steel collar of the Blender Jug is not
removable.
NOTE
If the Blade Assembly is difficult
to remove by hand, insert the
provided Blade Removal Tool into
the Blade Assembly base and turn
counterclockwise.
WARNING
Be careful when handling the blending
blades as they are sharp. Mishandling
of the blades may cause injury.
5. Remove the Silicon Gasket from the
Blade Assembly.
BJB840XL_IB_D10_FA.indd 38 16/08/10 10:02 AM