Filter
Top Products
24
OPERATING YOUR BREVILLE SMART OVEN™ - TOAST
For example, raisin toast, white light-
textured breads or thinly sliced bread may
require a lighter setting, whilst heavier
textured rye, whole wheat or fresh breads
may require a darker setting.
b) The number of slices is displayed as the
bottom figure on the LCD screen.
Turn the TIME dial to the left to reduce
the number of slices, or to the right
to increase the number of slices. The
number of slices range from ‘1’ to ‘6’.
NOTE
Your customized TOAST browning
setting and number of slices will
remain in the memory of the oven
until you change them or unplug
the oven from the wall outlet. When
the oven is plugged back into the
wall outlet, the TOAST function will
automatically return to the preset
browning setting ‘4’ and preset
number of slices ‘4’.
6. Press the START/CANCEL button
to activate this setting. The button
surround will illuminate red, the oven
alert will sound and the LCD screen will
illuminate orange.
7. The timer will be displayed and begin to
count down. The time can be adjusted
during the toasting cycle by turning the
TIME dial.
PRESS
NOTE
Element IQ™ will automatically
adjust the toasting time depending
on the heat already present inside
the oven. For example, if the oven
is already warm after one cycle of
toasting, the toasting time for the
second cycle will be less.
During the toasting cycle,
condensation may form on the oven
door and steam may be emitted. This
is normal. Condensation and steam
occur as a result of the moisture
content of the bread. Freshly baked
and frozen breads generally produce
more condensation.
8. At the end of the toasting cycle, the
oven alert will sound three times. The
START/CANCEL button surround will
no longer illuminate red and LCD screen
will illuminate blue.
WARNING
The outer surface of the oven,
including the oven door, is hot during
and after operation. Always use
protective hot pads or insulated oven
mitts when inserting, removing or
handling items from the oven.
9. The toasting cycle can be stopped at any
time by pressing the START/CANCEL
button. This will cancel the cycle. The
button surround illumination will go out
and the LCD screen will illuminate blue.
BOV800XL_IB_H11.indd 24 21/03/11 9:57 AM