Filter
Top Products
SUPREMA 2001 - OPERATION & SERVICE MANUAL
Suprema 2001 - Operation & Service July 6, 2001 Page 21 of 60
SETTING BOTTOM PAUSE
The bottom pause stops the piston before the pour spout area, creating a vacuum and
allowing time for the liquid coffee to be pulled through the coffee grounds and the
filter. If this setting is too low, it may create brewer flooding problems as there is not
enough time to draw all the liquid from the brew chamber into the brewer cylinder.
1. To adjust the "
BOTTOM PAUSE
", press the "
UP
" button on the hidden
menu scroll buttons and scroll until the following message appears,
a) Press the "
START
" button to enter the set mode.
b) At this point, you can now select the cup size and product by pressing the
appropriate buttons on the selection panel. The "
BOTTOM PAUSE" setting
displayed will correspond to the LED's that are illuminated.
c) Using the hidden setting adjustment buttons, increase or decrease the
timing for the "
BOTTOM PAUSE".
d) To exit the "SET BOTTOM PAUSE" mode and proceed to the next setting,
press the "
UP
" or "
DOWN
" scroll buttons.
SETTING THE MAXIMUM NUMBER OF CUPS PER CARAFE
This feature allows you to set the maximum number of cupe0 0 Prewceein aou rafthe