Filter
Top Products
SUPREMA 2001 - OPERATION & SERVICE MANUAL
Suprema 2001 - Operation & Service July 6, 2001 Page 5 of 60
UNPACKING & SETTING UP THE EQUIPMENT
UNPACKING THE EQUIPMENT
Check the shipping carton for shipping damage, prior to signing for the delivery. If any
damage is evident, indicate the damage on the delivery slip before signing. Make
certain that the driver signs in recognition of the damage. The carton left the factory
free from damage. If there is damage, the claim is to be made with the carrier, and not
with VKI Technologies.
1. Remove the coffee maker from its shipping carton.
a) Lay the coffee maker on its side.
b) Cut the tape on the bottom of the carton.
c) Fold the flaps outwards and cut off the bottom flap.
d) Remove the polystyrene (foam) packing material, and cut the plastic bag
with scissors, as indicated in figure 3.
e) Turn coffee maker upright and lift off the carton.
f) Remove the remaining polystyrene packing and the plastic bag.
g) Remove the decal package and set it aside, for the moment.
!Note:
Prior to signing
for any type of
delivery, check all
packages for
shipping related
damage.
If equipped with a
“Tip-N-Tell”
indicator, check
the status of the
indicator and note
any damage on
the bill of lading.