Everpure 2001 Hot Beverage Maker User Manual


 
SUPREMA 2001 - OPERATION & SERVICE MANUAL
Suprema 2001 - Operation & Service July 6, 2001 Page 25 of 60
SETTING NUMBER OF CHOCOLATE PUMP CYCLES
This feature will allow you to program the number of chocolate pump cycles for any
cup size. The unit is preset to the following from the factory:
CUP SIZE HOT CHOCOLATE CAFE MOCHA
Small - 6 oz.
2 cycles 1 cycle
Medium - 8 oz.
2 cycles 1 cycle
Large - 10 oz.
3 cycles 2 cycles
1. To set the number of chocolate pump cycles for each cup, press the "
UP
"
button on the hidden menu scroll buttons until the following message
appears,
a) Press the "
START" button to enter the set mode.
b) Select the cup size and product to be programmed on the front selection
panel.
c) Using the hidden setting adjustment buttons, increase or decrease the
number of pump cycles. Maximum is 8 for hot chocolate and 3 for café
mocha.
d) To set, press either one of the two hidden menu scroll buttons.
SETTING THE DOUBLE-CUP
Any one of the three cup sizes can be programmed to dispense a double-cup (two
consecutive cups) of coffee or cafe mocha using this feature. For example, if you would
like to brew a 20-oz. cup of coffee, it is possible to set a 10-oz. large cup to brew a
double-cup.
1. To program a cup to be a double-cup, press the "
UP
" button on the hidden
menu scroll buttons until the following message appears,
a) Press the "
START" button to enter the set mode.
b) On the front selection panel, press the cup size that needs to be
programmed to become a double-cup. The LED that corresponds to that
cup size will illuminate as an indication that it has been programmed as a
double-cup.
c) To program back to single cup, repeat the above procedure. Pressing the
cup size will switch the LED off, which indicates the double-cup feature
is disabled for that cup size.
Please note that if the carafe feature is enabled, it overrides the double-cup feature if
the double-cup is set for the large cup (this does not apply is double-cup is set on the
small or medium cup).
CHOCO PUMP
PRESS <START>
DOUBLE-CUP
PRESS <START>
!
Note:
If the number of
CAFE MOCHA
pump cycles has
been changed for
a particular cup
size, it is
necessary to enter
the “
SET
-
UP
” mode
to adjust the
product and water
levels for that cup
size.
!
Note:
Once a cup size is
programmed to
brew a double-
cup, it will no
longer brew a
single cup.
!
Note:
The double-cup
feature is not
available for hot
chocolate. For hot
chocolate,
increase the
number of
chocolate pump
cycles.