Filter
Top Products
3–2
A
B
C
D
H
J
L
E
N
O
M
K
I
F
G
ITEM DESCRIPTION
A Temperature Display Switch
B Left LED Display
C Right LED Display
D Cook Switch #1, Left
E Cook Switch #2, Left
F Cook Switch #1, Right
G Cook Switch #2, Right
H Recovery/Use Time Recall Switch, Left
I Recovery/Use Time Recall Switch, Right
J Light - Left Heating Mode Indicator
K Light - Right Heating Mode Indicator
L Switch - Left ON/OFF
M Switch - Right ON/OFF
N Switch - Left Product Selection
O Switch - Right Product Selection
To quickly determine the software version number and the current configuration of an M-100B
computer, with the computer turned OFF (OFF in both displays) press the temperature check
switch. The displays will automatically cycle through the version number, power configuration (gas
or electric), EPRA configuration (On or Off), and frypot configuration (full- or split-).
The M-100B is factory-programmed with McDonalds’s cooking specifications for a group of seven
standard products. The cooking times and temperature settings for these factory-programmed products
can be changed by store personnel if required. Additionally, two test menus are available for store
personnel to program product names, cooking times, temperature settings, and shake or duty times for
products not included on the factory-programmed menu. The test menus can also be set to
automatically adjust the cooking rate to compensate for product variances.
For units equipped with built-in filtration, the computer times the polishing process and alerts the
operator when the polishing time has elapsed. (Polishing refers to circulating the vegetable oil
through the filtration system for a specified time.)